your house could also be an indication that the condition of the property

Black mold is said to be dangerous to humans, particularly to individuals with low immune system because it releases toxins called  that can trigger allergic reactions, skin inflammation, headache, and nausea. In more advanced cases, it can pose serious health problems such as immune system suppression and even damage to internal organs or neurological breakdown .

Apart from discomfort, allergic reactions and other health risks associated with mold, the presence of black mold in your house could also be an indication that the condition of the property Planer blades need to be looked after properly to ensure they remain sharp and free from nay nicks. If they do have little nicks or have become less sharp than they were when you bought them, you need to replace them as soon as possible Not only will this ensure that you are able to do the best work possible, but it will protect your planer from damage and anything you are working on also

is suitable for other fungi to grow and cause decay. If left untreated, colonies of mold will then start to damage your structural supports, joints and other areas of your home by gradually eating away the surface. Hence, take it that the first sight of mold is an indication that your home is in need of repair and maintenance.

High moisture is the primary cause of mold growth

Mold in basement is a very common household problem and yet, a lot of homeowners still suffer from common issues like this because of lack of proper care and attention. To learn how mold growth can be prevented, it is important to first understand what is causing mold to grow on your home’s surface.High moisture is the primary cause of mold growth. Apparently, the moisture in your basement comes from the high levels of humidity inside the house, rainfall, groundwater and sometimes flooding. Since the basement is typically below ground level, water from outside your home will naturally gravitate towards the lowest area of the house making the basement more susceptible to flooding and rainwater seeping through the walls and windows thereby pooling excessive moisture in your basement.

Pipe Leaks

Pipe leaks often occur in the basement and there a number of factors why this can happen. For one, natural wear and tear will eventually cause the pipes to break and leak. But if that is not the case for you, it could be because of a clogged or faulty pipeline or a damaged foundation.On the other hand, natural causes such as soil movement or hydrostatic pressure rising from groundwater can cause damage to the pipes or the actual foundation causing it to split, crack, and leak.

Sump Pump Failure

Nearly every home has a sump pump. A sump pump is the pump located in the basement of your home which primary role is to keep water away from your property’s foundation by draining away water that has accumulated in a water-collecting sump basin.

Poor Ventilation

Poor ventilation will increase the condensation process inside your house, thereby pushing humidity levels up in the room and increasing moisture build up. Moreover, if you’re not regularly cleaning your basement, dust and dirt will eventually collect and make your basement a very suitable environment for mold growth. To improve your basement’s ventilation, you can do two things. First, you can add dehumidifiers and increase air flow or do a full encapsulation which is pretty common nowadays.

A full encapsulation will completely seal off your basement to minimize moisture and regulate the air flow in the room. With this, it will reduce the risk of mold growth and makes better air quality. Although if you opt to go this route, you need to take note that install a sump pump and dehumidifier. Tips to Prevent Basement Mold
To prevent mold from invading your home and exposing you and your family to potential health hazards, make sure to follow these three simple household tips.

Clean your basement

When you do your general house cleaning, make sure to include cleaning your basement. Vacuum your basement and aerate it to minimize moisture.

Use dehumidifiers

Install a dehumidifier to control the humidity level in your basement. You can also opt to use a hygrometer to regularly measure the humidity in the room and make sure that it is at least below 60%. Apart from dehumidifiers, you can also control dampness by running a fan in your basement for a few hours on a regular schedule or simply opening the windows to allow fresh air to enter.

Fix water leaks.

Conduct regular inspections and maintenance. Ensure that your pipes are in good working condition and fix leaks immediately. Leaks are not only limited to pipes alone, your window sills could also have some gaps or damage that could be a source of moisture so be sure to check thoroughly.

Although this may sound both obvious and a bit strange, it can make a huge world of difference to the type of work you can do with your hand planer if you make sure you are holding and pushing it properly. It is incredibly important to get the balance and posture right, as this will not only produce the best results; but, will also keep you safe while using it.The secret to keeping your basement mold free is by making sure that you keep it clean and dry all the time. However if you suspect that basement could already be infested with mold, the best that you can do is to have a reliable professional perform a mold inspection Richmond in your basement.